 |
| The purpose of this program is to provide basic precautions and protections for employees to avoid exposure to asbestos containing material (ACM) or presumed asbestos containing material (PACM) when working in Alberta. |
|
$25.00
|
  |
|
|
|
|
| This program sets forth a plan for the control of any biological or chemical substance used, produced, stored or disposed of at the workplace and is critical to the overall safety and health of employees in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to be in compliance with Alberta requirements and designed to assist workers for performing work safely while inside confined spaces. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to outline the procedures for safe operations and the training requirements regarding for cranes, hoists and lifting devices in Alberta. |
|
$25.00
|
|
|
|
|
 |
| The purpose of this program is to protect workers who may encounter demolition operations and the accompanying hazards while performing work in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide guidance for operations involving underground or overhead electrical equipment in Alberta. |
|
$25.00
|
|
|
|
|
|
| Each work location in Alberta shall establish a written Emergency Response Plan for responding to an emergency that may require rescue or evacuation. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to reduce if not eliminate injuries due to manual material handling in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide fall protection procedures to prevent injury to employees while performing work assignments at elevated levels in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide fire safety planning regarding fire, explosion, combustible materials and appropriate planning and procedures required to minimize risk for operations in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide procedures for first aid equipment and procedures when performing work in Alberta. |
|
$25.00
|
|
|
|
|
|
| This program is written to be in compliance with Alberta requirements and provide directives to managers, supervisors, and employees about their responsibilities in the operations and management of facilities as related to the indicated general safety requirements. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to protect employees from safety hazards that may be encountered during work in trenches and excavations in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide guidelines for identifying, assessing and controlling workplace hazard, to ensure the potential hazards of new processes and materials are identified before they are introduced into the workplace and to identify the jobs/tasks which require risk assessment in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to develop and implement safe work procedures respecting hot work processes performed in the workplace in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to establish minimum requirements for site specific H2S safety in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of the program is to prescribe rules and establish minimum requirements for the construction, care, and use of the common types of ladders in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this procedure is to identify the controls and actions necessary to prevent adverse health effects to employees from occupational exposure to lead and to ensure lead exposure management practices meet Alberta regulatory requirements. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to establish procedures for affixing appropriate lockout/tagout equipment in Alberta to energy isolating devices and to otherwise disable machines or equipment to prevent unexpected energization, start up or release of stored energy to prevent injury or incident. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to eliminate injuries and damage to equipment during logging work in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide direction to managers, supervisors, and employees about their responsibilities in the operations and management of machine guarding in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to provide a process to minimize employee hearing loss caused by excessive occupational exposure to noise in Alberta. |
|
$25.00
|
|
|
|
|
|
| This document provides information for workers when performing work in or around oil or gas wells in Alberta. |
|
$25.00
|
|
|
|
|
|
| The procedure provides direction to managers, supervisors, and workers about their responsibilities regarding the hazards of overhead electric lines in Alberta. |
|
$25.00
|
|
|
|
|
|
| This Personal Protective Equipment procedure provides direction to managers, supervisors and workers about their responsibilities in the selection, use, care, disposal and safe work procedures related to personal protective equipment in Alberta. |
|
$25.00
|
|
|
|
|
|
| This program is written to be in compliance with Alberta requirements and provide directives to managers, supervisors and employees about their responsibilities in the operations of powered mobile equipment. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to protect employees who may encounter ionizing radiation and its hazards while performing work in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this Respiratory Protection Code of Practice is to be in compliance with Alberta regulatory requirements and to assist workers for respiratory protection when performing work. |
|
$25.00
|
|
|
|
|
|
| This program outlines the procedures for safe operations and the training requirements regarding rigging equipment in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this program is to prevent injuries due to falls from elevated work areas and ensure workers are able to safely use and inspect scaffolding materials and erected scaffolds in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this silica exposure control plan (ECP) is to document our methods to protecting workers from harmful exposure to airborne silica dust when working in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of the program is to prescribe rules and establish minimum requirements for traffic control in operations for Alberta locations. |
|
$25.00
|
|
|
|
|
|
| These guidelines and requirements are designed to address specific actions to be taken by all personnel who drive commercial vehicles in Alberta. |
|
$25.00
|
|
|
|
|
|
| These guidelines and requirements are designed to promote public safety during the transportation of dangerous goods for operations in Alberta. |
|
$25.00
|
|
|
|
|
|
| A written Workplace Hazardous Materials Information System (WHMIS) program is in place that ensures that a controlled product is used, stored, and handled at a work site in accordance with Part 29 of the Alberta OHS Code. |
|
$25.00
|
|
|
|
|
|
| This program is intended to establish site specific procedures for checking the well-being of a worker assigned to work alone in Alberta. |
|
$25.00
|
|
|
|
|
|
| The purpose of this procedure is to ensure that workers receive neither injuries due to nor exposure to workplace violence in Alberta. |
|
$25.00
|
|
|
|
|
