The purpose of this program is to provide basic precautions and protections for workers who are involving in removing asbestos in order to avoid exposure to asbestos containing material or presumed asbestos containing material.

This process uses a proactive approach and is intended to communicate to employees the elements and the procedures of Behavior Based Safety that will assist in reducing at risk behaviors which in turn reduces injuries in our workplaces.

The purpose of competency assurance includes improved staff performance on the job, a framework for staff development and reduction of incidents.

The entry into a confined space is potentially one of the most dangerous activities associated with any hazardous substance operation. Due to the unique conditions that can exist, great care must be taken both before and during this type of work procedure.

The purpose of the construction safety plan is to set forth procedures for the safe work for construction sites.

Consultation is required when making decisions or changes that may affect the health or safety of workers.

The purpose of this policy is to assist managers with ensuring that new employees, contractors and clients receive a minimum core site induction, to be aware of the company safe work practice procedures.

The purpose of this program is to document and maintain up-to-date sufficient documentation to ensure that our health and safety management system is adequately understood and effectively and efficiently operated in Australia.

This program is written to be in compliance with local regulatory requirements and provide directives to managers, supervisors, and employees about their responsibilities in the operations and management of vehicle safety.

The purpose of the Electrical Safety program is to set forth procedures for the safe use of electrical equipment, tools and appliances.

Each workplace location shall have a written emergency plan, appropriate to the hazards of the site specific workplace, in order to respond to an emergency that may require rescue or evacuation.

This program is designed to prepare a workplace location for emergency conditions which may arise from within Australian workplaces.

The purpose of the energized electrical work program is to set forth procedures for the safe working conditions and acts involving energized electrical equipment.

Sustainability is a new way of thinking about an age-old concern: ensuring that our children and grandchildren inherit a tomorrow that is at least as good as today, preferably better. Sustainability is defined as meeting the needs of the present without compromising the ability of future generations to meet their own needs. We want to make sure that the way we live our lives is sustainable - that it can continue and keep improving for a long time.

The purpose of this program is to provide direction to managers, supervisors, and employees about their responsibilities in the operations and management of operating equipment and machinery.

The purpose of this program is to protect workers from hazards encountered during work in trenches and excavations.

The purpose of this program is to provide fall protection procedures to prevent injury to workers while performing work assignments at elevated levels.

The purpose of this program is to ensure adequate first aid supplies and treatment is available for our workers.

The purpose of this program is to establish our minimum expectations for a worker’s fitness for work in Australia.

The purpose of this program is to provide guidelines for identifying, assessing and controlling workplace hazards; to ensure the potential hazards of new processes and materials are identified before they are introduced into the workplace and to identify the jobs/tasks which require risk assessment.

The purpose of this program is to ensure that hazardous chemicals are evaluated and appropriate warning information and training is communicated to workers.

(Includes Supplement) The purpose of this program is to have effective procedures for reporting and evaluating/investigating incidents and non-conformances in order to prevent further occurrences.

The purpose of this program is to establish requirements for the safe operation and use of industrial lift trucks.

The purpose of this program is to establish requirements for occupation hygiene and occupational health monitoring for employees working in areas that contain hazards requiring health monitoring.

The purpose of this program is to document and maintain up-to-date sufficient documentation to ensure that our health and safety management system is adequately understood and effectively and efficiently operated in Australia.

(Includes Supplement) Scheduled audits, inspections or management systems reviews must take place. This program will identify the method and process for completing the inspection, audit or review and how it should be documented. Workplace self-inspections and audits shall take place according to this written procedure.

KPIs are used to quantify data which allows management to know what changes need to be made, to review individual project management success towards compliance and to track progress towards published OHS goals and objectives in Australia.

The purpose of this procedure is to identify the controls and actions necessary to prevent adverse health effects to workers from occupational exposure to lead.

The purpose of this program is to provide a corporate commitment and leadership requirements to reinforce our systematic approach to safety and health in order to have an incident free culture of safety.

Musculoskeletal disorders (MSD) account for a majority of reported injuries and we must minimize the risk and incidence of MSDs.

The purpose of this program is to provide a process to minimize worker hearing loss caused by excessive occupational exposure to noise.

The purpose of the Occupational Health and Safety (OHS) Policy is to state our commitment to provide safe and healthy working conditions. It outlines the steps that are taken to meet these commitments and provides the framework for the Occupational Health and Safety Management System.

The purpose of this program is to encourage participation in good safety and health practices and support for our policy and objectives by consulting and communicating with all employees via use of safety meetings in Australia.

The purpose of this Personal Protective Equipment program is to set forth the procedures for the use, care and maintenance of personal protective equipment required to be used by employees for the prevention of injuries.

This procedure provides direction to managers, supervisors, and workers about their responsibilities as related to plant operations and management of facilities and to reduce risks from facility conditions.

This program is written to provide directives to managers, supervisors and workers about their responsibilities in the operations and management of powered mobile plant.

The purpose of this Personal Protective Equipment regulatory supplement is to update the procedures for the use, care and maintenance of personal protective equipment required to be used by employees for the prevention of injuries.

The purpose of the construction safety plan is to set forth procedures for the safe work for construction projects imposed duties when acting as the principal contractor.

The purpose of this program is to provide fall protection procedures to prevent injury to workers while performing work assignments at elevated levels in Queensland.

The purpose of the program is to prescribe rules and establish minimum requirements for the construction, care, and use of the common types of ladders.

The purpose of this program is to protect employees who may encounter demolition and the accompanying hazards while performing work in Queensland.

The purpose of this electrical work program is to set forth procedures for the safe use of electrical equipment, tools and appliances when working in Queensland.

The purpose of this training program is to protect employees from safety hazards that may be encountered during work in trenches and excavations in Queensland.

The purpose of this program is to provide a process to minimize worker-hearing loss caused by excessive occupational exposure to noise while performing work in Queensland.

The purpose of this program is to describe the process developed to identify and have access to legal and other requirements, to keep the information up to date and to communicate these requirements to those with compliance responsibilities.

The purpose of this requirement is to ensure continuing suitability, adequacy and effectiveness of the safety management system, to address needs for changes to corporate policy, objectives and other elements of the safety management system and to identify opportunities for continual improvement.

The purpose of this program is to provide guidelines for identifying, assessing and controlling workplace hazards; to ensure the potential hazards of new processes and materials are identified before they are introduced into the workplace and to identify the jobs/tasks which require risk assessment.

The purpose of this program is to prevent injuries from elevated work areas and ensure workers and contractors are able to inspect and use scaffolding safely.

The purpose of the Short Service Employee (SSE) Management program is to prevent work related injuries and illnesses to new hires and temporary workers. The Supervisors and co-workers must be able to readily identify Short Service Employee participants.

The purpose of this plan is to document spill prevention and response requirements. Each work site will develop a spill prevention and response plan based on the requirements and template provided.

The Stop Work Authority process involves a stop, notify, correct and resume approach for the resolution of a perceived unsafe condition, act, error, omission or lack of understanding that could result in an undesirable event.

The purpose of this program is to document a list of approved subcontractors. NOTE: You MUST enter at least one subcontractor in the document in order to pass this requirement.

The purpose of this program is to ensure our company continues to improve subcontractor health, safety and environmental performance and to establish a standard for pre-qualification, evaluation/selection and development of our subcontractors.

The purpose of this program is to comply with guidelines for the training and certification of workers in high risk work.

The purpose of this policy is to ensure that a minimum OHS training is received & future training needs are identified.

The purpose of this waste management plan is to provide guidance and requirements necessary for efficient, effective and compliant waste management during construction and operations.