The purpose of this procedure is to advise employees in areas where ammonia is being used and to supply on an awareness level basis about the properties and hazards of ammonia, general guidelines and training requirements.

The purpose of this procedure is to advise employees in areas where asbestos is suspected on an awareness level basis about the properties and dangers of asbestos, general guidelines and training requirements and to provide basic precautions and protections for employees to avoid exposure to asbestos containing material (ACM) or presumed asbestos containing material (PACM).

This process uses a proactive approach and is intended to communicate to employees the elements and the procedures of Behavior Based Safety that will assist in reducing at risk behaviors which in turn reduces injuries in our workplaces.

These guidelines and requirements are designed to address specific actions to be taken by all personnel who drive vehicles greater than 4500 kg GWR in Canada.

The purpose of this program is to outline the procedures for safe operations and the training requirements regarding cranes, hoists and lift trucks.

The purpose of this program is to outline the procedures for safe operations and the training requirements regarding crane and lifting devices, including critical lift operations.

This is a new drug and alcohol policy required by some Owner Clients in Canada after the marijuana legislation recently passed. It is not based on provincial law but is required of contractors by some Owner Clients.

The purpose of this program is to establish and implement a best practices program for compliance to inform personnel of the potential exposure to electrical hazards in operations and to provide guidelines for personnel to use when dealing with those operations.

Each work location shall have a written Emergency Response Plan, appropriate to the hazards of the workplace, in order to respond to an emergency that may require rescue or evacuation.

The purpose of these erosion and sediment control requirements shall be to prevent excess erosion and the silting and muddying of lakes, ponds, wetlands and any rivers, streams of creeks which may lie in close proximity to work produced by our company.

The purpose of this waste management strategy was developed to provide guidance and requirements necessary for efficient, effective and compliant waste management during construction and operations.

The purpose of this plan is to document spill prevention and response requirements. Each work site will develop a spill prevention and response plan based on the requirements and template provided.

We want to be the leader in environmental sustainability within our industry and through a focused effort to become more aware of the effects our business practices, workers, business partners, subcontractors and vendors have on the environment.

The purpose of this plan is to determine if wastewater is hazardous or non-hazardous before discharge. The content of any wastewater should be known before discharging.

The purpose of this program is to provide fall protection procedures to prevent injury to employees while performing work assignments at elevated levels for specific clients.

The purpose of this program is to ensure our employees recognize to effect of fatigue as related to safely being able to perform work and to establish guidelines for work hours and equipment to reduce fatigue in our business and at our client locations in Canada.

All full and part-time staff are expected to report for work fit for duty, which means able to perform their job duties in a safe, appropriate and an effective manner free from the adverse effects of physical, mental, or emotional problems in Canada.

The purpose of this program is to provide fire safety planning regarding fire, explosion, combustible materials and appropriate planning.

It is our intention to provide gas hazards training and detection equipment to minimize risk to our employees.

The purpose of this program is to provide employees general information for working on owner client property.

The purpose of this program is to provide establish requirements for the safe operation of hand and power tools and other portable tools, including proper guarding.

The hazard identification process will be used for routine and non-routine activities as well as new processes, changes in operation, products or services as applicable.

The purpose of this program is to develop and implement safe work procedures respecting hot work, welding and allied processes.

We will ensure our workers are aware of the hazards and controls associated with working on or near rails or tracks at a client facility.

The purpose of this program is to have effective procedures for reporting and evaluating/investigating incidents and non-conformances in order to prevent further occurrences.

We care about the environment and we are doing our part to make us sustainable for future generations.

The purpose of this program is to establish general job competency requirements.

This program is written to reduce incidents involving vehicle operations and to require planning of trips by all employees operating owned, leased or borrowed vehicles in Canada.

The purpose of the program is to prescribe rules and establish minimum requirements for the construction, care and use of common types of ladders.

The purpose of this program is to establish procedures for affixing appropriate lockout/tagout equipment to energy isolating devices and to otherwise disable machines or equipment to prevent unexpected energization, start up or release of stored energy to prevent injury or incident.

The purpose of this standard is to assure appropriate review occurs before process and structural changes are made to facilities, processes and equipment.

The purpose of this program is to prevent exposure to naturally occurring radioactive materials (NORM) when NORM is present. Different types of radionuclides that may be present can include thorium, radium or radon.

The purpose of this procedure is to advise employees in areas where nitrogen is being used and to supply on an awareness level basis about the properties and hazards of nitrogen, general guidelines and training requirements.

This document provides information for workers when performing work in or around oil and/or gas drilling rigs.

UPDATED 03/12/2020 - A pandemic disease will spread rapidly and easily from person to person, affecting all businesses due to absenteeism. Businesses that are relied upon by other businesses will be facing the same massive absentee rates, and will be unable to provide essential components to maintain the daily operations.

The purpose of this program is to set requirements for Safe Work Permits to be used to ensure work is planned and executed safely with the proper permission and documentation as required by clients in Canada.

This program is written to provide directives to managers, supervisors and employees about their responsibilities in the operations of powered mobile equipment.

The purpose of the Preventative Maintenance program is to set forth the procedures for the tracking, care, and maintenance of equipment.

The purpose of this program is to establish a firm but fair progressive disciplinary action policy to enforce the safety system.

The purpose of this procedure is to address psychological health in the workplace.

The purpose of this procedures is to provide additional requirements for our Respiratory Protection procedure.

The Right to Refuse Unsafe Work (RTRUW) process involves a stop, notify, correct and resume approach for the resolution of a perceived unsafe condition, act, error, omission or lack of understanding that could result in an undesirable event. All workers have the right to refuse unsafe work.

It is our goal to return employees to meaningful, productive temporary employment following injury or illness until their health care provider releases them to full duty.

The purpose of the program is to prevent work related injuries and illnesses to new hires and temporary workers.

Each Canadian work location shall have a written Emergency Response Plan, appropriate to the hazards of the workplace, in order to respond to an emergency that may require rescue or evacuation. Each Emergency Response Plan shall be prepared to reflect all known probable emergency conditions which may arise from within the workplace and from adjacent workplaces.

The purpose of this program is to ensure our company continues to improve subcontractor health, safety and environmental performance and to establish a standard for pre-qualification, evaluation/selection and development of our subcontractors.

The purpose of this program is to provide direction to managers, supervisors, and employees about their responsibilities as related to safe work procedures pertaining to thermal exposure in Canada.

The purpose of the program is to prescribe rules and establish minimum requirements for traffic control in operations for Canadian locations.

The purpose of this program is to protect employees from safety hazards that may be encountered while driving or operating vehicles.

It is our policy that special precautions are taken when manufacturing, using, handling, storing and disposing of hazardous products. General and specific training is required for those employees who work with or in close proximity to hazardous products.

The purpose of this program is to prevent injuries due to electrical exposure to high voltage for employees and contractors.

The purpose of this program is to provide general safety guidelines for working on or near water in Canada.

The purpose of this program is to prevent injuries due to electrical exposure employees and contractors under our supervision.