New or Revised

The purpose of this Behavior Based Safety SPE V2 program for Veriforce® is to provide an initiative for an education and observation process used to improve safety and reduce risk in the workplace.

This ISNetworld® Business Continuity RAVS® program has been established to ensure that critical business functions will be available to customers in the event of a natural or human-induced disaster.

The purpose of this Veriforce® Cold Weather SPE V2 procedure is to address the hazards of working in cold weather environments.

The purpose of this Veriforce® Compressed Air SPE V2 written program is to address the hazards of working with compressed air.

The purpose of this Veriforce® Crane Offshore SPE V2 program is to address the hazards of operating cranes in an offshore environment.

The purpose of this ISNetworld® Cyber Access Control and Account Monitoring RAVS® procedure is to provide basic security awareness training to information system users (including managers, senior executives, and contractors) regarding access control and account monitoring.

The purpose of this ISNetworld® Inventory of Devices and Software RAVS® procedure is to provide basic security awareness training to information system users (including managers, senior executives, and contractors) regarding inventory of devices and software.

The purpose of this ISNetworld® Malware Protection Prevention and Defense RAVS® procedure is to provide basic security awareness training to information system users (including managers, senior executives, and contractors) regarding Malware and protection against.

The purpose of this Driving Safety for Veriforce® SPE V2 program is to address the hazards of driving owned and leased vehicles.

The purpose of this Avetta Fitness for Duty / Fatigue Management program is to set forth procedures for ensuring employees are physically fit to perform their duties and to institute procedures to reduce injuries due to employees prolong work periods.

The purpose of this Veriforce® Noise Awareness SPE V2 written program is to address the hazards of utilizing or storing flammable liquids.

The purpose of this Veriforce® Heat Stress and Prevention SPE V2 program is to to address the hazards of working in warm and hot environments.

During hydrovac operations, workers are at risk of being exposed to toxic gases, flammable materials, and other various hazards. This procedure will address proper and safe hydrovac operations.

The purpose of this Incident Investigations Veriforce® SPE V2 program is address incident investigations and procedures to reduce or eliminate reoccurrences of incidents.

The purpose of this ISNetworld® Injury and Illness Prevention Program RAVS® program is to help prevent injuries and illnesses for all employees performing work.

The purpose of this Injury and Illness Recordkeeping SPE V2 program for Veriforce® is to addresses injury and illness recordkeeping per Veriforce® requirements.

The purpose of this Veriforce® Lead Abatement and Removal SPE V2 procedure is to address the hazards of working with lead during abatement and/or removal work.

The purpose of this Veriforce® Lead Awareness SPE V2 procedure is to address where employees whose work activities may contact lead containing materials but do not disturb the material during their work activities.

The purpose of this Veriforce® Manual Lifting SPE V2 procedure is to address the hazards of manual lifting.

The purpose of this Veriforce® Noise Awareness SPE V2 written program is to address the hazards of working in environments with high noise levels.

The purpose of this Non-DOT Drug and Alcohol SPE V2 for Veriforce® is to provide a drug and alcohol procedure acceptable to Veriforce clients.

The purpose of this Veriforce® Powered Platforms SPE V2 program is to establish requirements for the safe operation and use of Powered Industrial Trucks.

The purpose of this Preventative Maintenance SPE V2 program for Veriforce® is to set forth the procedures for the tracking, care, and maintenance of equipment.

The purpose of this RAVS Plus® Behavior Based Safety Observation Form for ISNetworld® is to document safety observations.

The purpose of this RAVS Plus® Driving Safety Pre-Use Inspection Form is to document safe vehicle conditions prior to use.

This Avetta Records Retention procedure is to insure the retention and right of access to relevant exposure and medical records to employees and/or their designated representatives.

The purpose of this Veriforce® Rigging (Offshore) SPE V2 program is to address the hazards of rigging in the offshore environment.

The purpose of this Risk Assessment SPE V2 program for Veriforce® is to address and describe the processes for risk assessments per Veriforce® requirements.

The purpose of this Avetta Road Transportation safety program is is written to be in compliance with federal and local regulatory requirements and provide directives to managers, supervisors, and employees about their responsibilities in the operations and management of commercial motor vehicles.

OFFSHORE WORK - The purpose of this RAVS® program is to meet client requirements for Safety and Environmental Management Systems (SEMS) as related to Hazard Analysis (JSA).

The purpose of the Short Service Employee for Veriforce® SPE V2 program is to prevent work related injuries and illnesses to new hires and temporary workers.

The purpose of this Veriforce® Silica Awareness SPE V2 written program to address informing company employees of the hazards of respirable crystalline silica through silica awareness training.

This Stop Work Authority (SWA) SPE V2 for Veriforce® is a process that involves a stop, notify, correct, and resume approach for the resolution of a perceived unsafe condition, act, error, omission, or lack of understanding that could result in an undesirable event.

This Avetta Stop Work Authorization (SWA) process involves a stop, notify, correct and resume approach for the resolution of unsafe conditions.

The purpose of this ISNetworld® Subcontractor Management RAVS® program is to ensure our company continues to improve subcontractor health, safety and environmental performance and to establish a standard for pre-qualification, evaluation/selection and development of subcontractors.

The purpose of this Veriforce® Subcontractor Management SPE V2 program is to address the use of subcontractors.

The purpose of this Veriforce® Subpart O - Production SPE V2 program is to address the requirements of 30 CFR Part 250 Subpart O as related to Production.

The purpose of this Veriforce® Subpart O - Well Control SPE V2 program is to address the requirements of 30 CFR Part 250 Subpart O as related to Well Control.

This ISNetworld® Subpart O - Well Control RAVS® program is established to fulfill ISNetworld® requirements to define the minimum requirements for employees who are engaged in Well Control Safety Systems Operations in Outer Continental Shelf waters in the Gulf of Mexico.

The purpose of this ISNetworld® Welding | Cutting | Hot Work RAVS® program is to assure a safe work environment during welding, cutting, and hot work operations.

This Avetta Wildfire Risk Mitigation Plan is tis applicable when performing work on an Owner/Client’s land, is required by an Owner and apply anytime a local, state, or federal agency has declared the fire danger rating/index to be High, Very High, or Extreme.