Avetta USA Safety Programs

The purpose of this Avetta Access to Employee Medical and Exposure Records procedure is to insure right of access to relevant exposure and medical records to employees and/or their designated representatives.

The purpose of this Avetta Arc Flash Safety program is to prevent injuries involving arc flash potential operations. For more information refer to CFR 1926.960.

The purpose of this Avetta Arsenic Awareness procedure is to identify the controls and actions necessary to prevent adverse health effects to employees from occupational exposure to arsenic, and to ensure that arsenic exposure management practices meet regulatory requirements.

The purpose of Avetta Asbestos Awareness safety program is to provide basic precautions and protections for employees to avoid exposure to asbestos containing material (ACM) or presumed asbestos containing material (PACM).

The purpose of this Avetta Asbestos Exposure Management program is to provide management precautions and protections for employees to avoid exposure to asbestos containing material (ACM) or presumed asbestos containing material (PACM).

The purpose of this Avetta Benzene safety program is to define work practices, administrative procedures and engineering controls to protect employees exposed to benzene concentrations above the action level. This plan shall be implemented and kept current by the Safety Manager as required to reflect the most recent exposure monitoring data.

This Avetta Bloodborne Pathogen Exposure Control Plan has been established to ensure a safe and healthful working environment and act as a performance standard for all employees.

This Avetta Business Continuity Plan has been established to ensure that critical business functions will be available to customers in the event of a natural or human-induced disaster.

The purpose of this Avetta Cadmium safety program is to establish requirements for the use and handling of materials that may expose employees to cadmium.

This Avetta Chemical Hazards (HAZCOM) procedure is to ensure the safe use of hazardous chemical substances.

The purpose of this Avetta Concrete Masonry Construction Safety program is to prevent injury from hazards associated with concrete and masonry construction work.

The purpose of this Avetta Confined Spaces program is to ensure the safety of all employees and contractors and to comply with all regulations and host clients that pertain to confined spaces.

The purpose of this Avetta Cranes and Rigging program is to outline the procedures for safe operations and the training requirements regarding crane and lifting devices, including all rigging is designed, constructed, installed, maintained and operated to perform safely.

The purpose of this Avetta Demolition Work program is to protect employees who may encounter demolition and the accompanying hazards while performing work.

The purpose of this Avetta Disciplinary program is to establish a firm but fair disciplinary action policy to enforce the safety system.

The purpose of this Avetta Dropped Objects Plan is to prevent injury to personnel due to dropped objects.

This Avetta Drug and Alcohol Program is applicable to all employees and subcontractors. If subcontractors are used they are required to comply with this policy and testing requirements.

The purpose of this Avetta Electrical (Qualified) Safety Program is to establish and implement written procedures for compliance to inform personnel of the potential exposure to electrical hazards in operations and to provide guidelines for to use when dealing with those operations.

The purpose of this Avetta Electrical Equipment Grounding Assurance program is to provide procedures and guidelines to eliminate all injuries resulting from possible malfunctions, improper grounding and/or defective electrical tools. This program applies to all sites, employees and contractors and shall be used on owned premises.

The purpose of this Avetta Elevated Platforms Aerial Lifts safety program is to define the requirements for safely operating an aerial lift device.

This Avetta Emergency Action Plan is to allow preparation to reflect all known probable emergency conditions which may arise from within the workplace and from adjacent workplaces, the minimum of which will include fire or other emergencies.

This Avetta Environmental Sustainability procedure is to help meet the needs of the present without compromising the ability of future generations to meet their own needs.

This Avetta Ergonomics procedure is to help reduce musculoskeletal disorders (MSD) which account for a majority of reported injuries and we must minimize the risk and incidence of MSDs.

The purpose of this Avetta Fall Protection program is to provide fall protection procedures to prevent injury to employees while performing work assignments at elevated levels.

This Avetta Fall Protection Tower Climber & RF Energy Program establishes standards and procedures to provide for the safety of telecommunications workers that climb, traverse, move, rest, and work on towers, poles or at elevated work sites.

The purpose of this Avetta Fall Protection Tower Climber program is to provide fall protection procedures to prevent injury to employees while performing work assignments during tower climbing.

The purpose of this Avetta Fire Protection safety program is to provide fire safety planning regarding fire, explosion, combustible materials and appropriate planning and procedures required to minimize risk.

The purpose of this Avetta First Aid program is to establish the minimum first aid supplies, equipment and actions to properly respond to injuries.

The purpose of this Avetta Fitness for Duty / Fatigue Management program is to set forth procedures for ensuring employees are physically fit to perform their duties and to institute procedures to reduce injuries due to employees prolong work periods.

The purpose of this Avetta Forklift Safety program is to establish requirements for the safe operation and use of forklifts.

The purpose of this Avetta Gas Hazards and Indicators/Meters program is to provide gas hazards training and detection equipment that meets or exceeds all required standards.

This document covers Avetta requirements for Roles & Responsibilities, Site Inspections, Safety Orientation, Housekeeping, Illumination, Impairment, Improper Conduct, Industrial Hygiene, and Safe Equipment Maintenance.

The purpose of this Avetta H2S (Hydrogen Sulfide) Awareness program is to establish minimum requirements for site specific H2S safety, which will enhance safety in the occupational setting where hydrogen sulfide is present or is recognized as being potentially present.

The purpose of this Avetta Hazard Analysis procedure is to help provide a formal process in place to identify the various tasks that are to be performed and the accompanying identified potential hazards. The results are included in a report of the results of the hazard assessment and the methods used to control or eliminate the hazards identified.

The purpose of this Avetta Hazardous Waste Operations (HAZWOPER) program is to cover emergency and post-emergency response operations standards, to include training for personnel responding to releases or substantial threats of releases chemical or petroleum products without regard to the location of the hazard.

The purpose of this Avetta Heat or Cold Stress Safety Program is to provide direction to managers, supervisors, and employees about their responsibilities as related to safe work procedures pertaining to thermal exposure.

This Avetta Heavy Mobile Equipment Operation program provides information to managers, supervisors, and employees about their responsibilities in the operations heavy mobile equipment.

The purpose of this Avetta Hexavalent Chromium for Avetta (covers both) program is to establish requirements for the use and handling of materials that expose employees to hexavalent / chromium.

The purpose of this Avetta Incident and/or Near Miss Investigation program is to have effective procedures for reporting and evaluating/investigating incidents and non-conformances in order to prevent further occurrences.

The purpose of this Avetta Ionizing Radiation Exposure Safety program is to protect employees who may encounter ionizing radiation and its hazards while performing work.

The purpose of this Avetta Ladders program is to prescribe rules and establish minimum requirements for the construction, care, and use of the common types of ladders.

The purpose of this Avetta Lead Awareness program is to advise employees in areas where lead is suspected on an awareness level basis about the properties and dangers of lead, general guidelines and training requirements.

The purpose of this Avetta Lead Exposure Management safety procedure is to identify the controls and actions necessary to prevent adverse health effects to employees from occupational exposure to lead, and to ensure lead exposure management practices meet regulatory requirements.

The purpose of this Avetta Lockout Tagout program is to establish procedures for affixing appropriate lockout/tagout equipment to energy isolating devices and to otherwise disable machines or equipment to prevent unexpected energization, start up or release of stored energy to prevent injury or incident.

The purpose of this Avetta Management of Change program is to assure appropriate review occurs before process and structural changes are made to facilities, processes and equipment or owner client Process Safety Management requirements.

The purpose of this Avetta Noise Hearing Conservation program is to provide a process to minimize employee-hearing loss caused by excessive occupational exposure to noise.

The purpose of this Avetta NORM safety program is to prevent exposure to naturally occurring radioactive materials (NORM) when NORM is present. Different types of radionuclides that may be present can include thorium, radium or radon. This program is written to Avetta's requirements.

The purpose of this Avetta Personal Protective Equipment (PPE) program is to set forth the procedures for the use, care, and maintenance of personal protective equipment required to be used by employees for the prevention of injuries.

The purpose of this Avetta Portable Electric and Power Tools safety program is to provide establish requirements for the safe operation of hand and power tools and other portable tools, including proper guarding.

The purpose of this Avetta PSM Awareness and Management program is to prevent or minimize consequences of catastrophic releases of toxic, reactive, flammable or explosive chemicals in various industries such as refineries, etc.

The purpose of this Avetta Radio Frequency (RF) and Electromagnetic Safety Program is to minimize the risk of adverse health effects related to radiofrequency (RF) fields.

The purpose of this Avetta Respiratory Protection safety program is to protect workers against any adverse health effect caused by inhalation of contaminants in the work environment.

The purpose of this Avetta Road Transportation safety program is is written to be in compliance with federal and local regulatory requirements and provide directives to managers, supervisors, and employees about their responsibilities in the operations and management of commercial motor vehicles.

The purpose of this Avetta Scaffolds safety program is to prevent injuries due to falls from elevated work areas and ensure employees and contractors are able to inspect scaffolding materials and erected scaffolds.

The purpose of this Avetta Silica Exposure Control for Construction safety program is to set out our approach to protecting workers from harmful exposure to respirable crystalline silica dust in accordance with Avetta stated requirements.

The purpose of this Avetta Silica Program is to establish an exposure control plan (ECP) is to set out an approach to protecting workers from harmful exposure to airborne silica dust.

The purpose of this Avetta Subcontractor Safety Management Program is to ensure subcontractor health, safety and environmental performance and to establish a standard for pre-qualification, evaluation/selection and development of our subcontractors.

The purpose of this Avetta Tool Safety program is is to provide establish requirements for the safe operation of hand and power tools and other portable tools, including proper guarding.

The purpose of this Avetta Tree Trimming and Removal Safety program is to eliminate injuries and damage to equipment during tree falling, trimming and removal, especially when in proximity of energized electrical lines.

The purpose of this Avetta Trenching and Excavation program is to protect employees from safety hazards that may be encountered during work in trenches and excavations.

The purpose of this Avetta Water Survival Orientation Program is to establish requirements for proper conduct when working over or on the water and survival in the event of an emergency.

The purpose of this Avetta Welding, Cutting & Hot Work program is to assure a safe work environment during welding, cutting, and hot work operations.

This Avetta Wildfire Risk Mitigation Plan is tis applicable when performing work on an Owner/Client’s land, is required by an Owner and apply anytime a local, state, or federal agency has declared the fire danger rating/index to be High, Very High, or Extreme.

The purpose of this Avetta Work Zone Safety program is to prescribe rules and establish minimum requirements for traffic control and work zone safety.

The purpose of this Avetta Working Alone program is intended to establish site specific procedures for checking the well-being of a worker assigned to work alone.